PLEXIGLAS® Satinice

With its warm and soft appearance, the velvety surface of PLEXIGLAS® Satinice simply cries out to be touched. Due to its translucency, the material looks especially attractive in combination with light. This material’s velvet surfaces are robust, pleasant to the touch and discretely light-diffusing.

Sheets and tubes are available with a matte satin surface on one or both sides, or with diffuser beads evenly distributed throughout the material, in various colors. This surface makes the material insensitive to traces of wear and finger marks. PLEXIGLAS® Satinice is available with a satin surface on one side (SC) or on both sides (DC), and in a grade with diffuser beads that are evenly distributed throughout the material, not just at the surface (DF).

PLEXIGLAS® Satinice Cast Acrylic

The light transmission is given as a typical value for 3 mm thickness. Measurement is performed with the textured side facing the light source. If the textured side is turned away from the light source, the transmittance may be slightly lower due to the texture. Exact values cannot be measured for technical reasons. The material conforms to ISO 7823-1 and is largely UV-absorbing; partially UV-transmitting in some grades at smaller thicknesses. We supply cut-to-size sheets from size 100 × 25 mm. Slight deviations from ordered quantity are possible.

The color may vary slightly from batch to batch. The reverse side of translucent or opaquely colored solid sheets may differ slightly from the controlled service side that is marked with the grade. Translucent and opaque (pigmented) grades may show slightly different bonding behavior on their top surface and on the reverse. It is recommended to perform prior tests.

PLEXIGLAS® Satinice Extruded Acrylic

The light transmission is given as a typical value for 3 mm thickness. It is measured according to test standard DIN 5036, Part 3. The values may vary depending on the type of measuring equipment used. The material conforms to ISO 7823-2 and is largely UV-absorbing; partially UV-transmitting in some grades at smaller thicknesses. We supply cut-to-size sheets from size 100 × 25 mm. Slight deviations from ordered quantity are possible.

The color may vary slightly from batch to batch. The reverse side of translucent or opaquely colored solid sheets may differ slightly from the controlled service side that is marked with the grade. Special grades are made to order. The entire batch is delivered, quantities of up to +/–10% over or under the order may be supplied.

PLEXIGLAS® Satinice

Some examples of PLEXIGLAS® Satinice in action


PLEXIGLAS® Satinice Properties & Applications

PLEXIGLAS® Satinice Properties

In addition to the well-known and time-tested properties of PLEXIGLAS®, such as

  • • excellent light transmission and brilliance
  • • very high weather resistance
  • • ease of fabrication
  • • low weight – about half the weight of glass
  • • 11 times the impact strength of glass
  • • 100% recyclability

 

PLEXIGLAS® Satinice offers the following special features:

  • • white grades with varying degrees of light diffusion
  • • balanced ratio of light diffusion and transmittance
  • • grade 0D010 DF meets food-contact requirements
  • • insensitivity to traces of wear

Applications of PLEXIGLAS® Satinice

These properties make PLEXIGLAS® Satinice especially suitable for:
• wall paneling in architectural applications
• tubes as luminaires or lighting elements
• white-translucent grades as covers for lamps and skylights (especially 0D010 DF)

Surfaces & Other Properties

Cast Sheet
plexiglas-satinice-cast-acrylic

  • + light-diffusing
  • + insensitive surface
  • + extremely easy to machine and fabricate
  • + wide range of thicknesses and colors available
  • Extruded Sheet
    plexiglas-satinice-extruded-acrylic

    • + light-diffusing
    • + low thickness tolerance
    • + tough surface due to diffuser beads
    • + texture is retained after thermoforming
    • Extruded Sheet with optimum light diffusion
      plexiglas-satinice-extruded-acrylic-light

      • + light-diffusing
      • + texture is retained after thermoforming
      • + good balance between light diffusion and light transmission.
      • + light-diffusing beads evenly distributed throughout the material

Technical Data Sheets

ColourColour NumberTransmission TypeTransmission %Transmission
one satin surface
Crystal0F00 SCtransparent92%constant transmission for all thicknesses
CoconutWH02 SCtranslucent44%constant transmission for thicknesses of 3–10 mm
Black Panther9H01 SCopaque0%constant transmission for thicknesses of 3–10 mm
two satin surfaces
Crystal0F00 DCtransparent92%constant transmission for all thicknesses
CoconutWH02 DCtranslucent44%constant transmission for thicknesses of 3–10 mm
SnowWH10 DCtranslucent70%constant transmission for thicknesses of 3–10 mm
Sunshine1H17 DCtranslucent41%constant transmission for thicknesses of 3–10 mm
Orange2C02 DCtransparent54%constant transmission for all thicknesses
Mandarin2H08 DCtranslucent39%constant transmission for thicknesses of 3–10 mm
Cherry3C01 DCtransparent4%constant transmission for all thicknesses
Strawberry3C04 DCtransparent21% constant transmission for all thicknesses
Indian Summer3C13 DCtransparent13%constant transmission for all thicknesses
Plum4H01 DCtranslucent41%constant transmission for thicknesses of 3–10 mm
Lollipop4H12 DCtranslucent49%constant transmission for thicknesses of 3–10 mm
Sky Blue5C01 DCtransparent5%constant transmission for all thicknesses
Ice Blue5H03 DCtranslucent61%constant transmission for thicknesses of 3–10 mm
Laguna5H74 DCtranslucent45%constant transmission for thicknesses of 3–10 mm
Ice Green6C03 DCtransparent90%constant transmission for all thicknesses
Kiwi6H07 DCtranslucent47%constant transmission for thicknesses of 3–10 mm
Grass6H55 DCtranslucent46%constant transmission for thicknesses of 3–10 mm
Carbon7C17 DCtransparent2%constant transmission for all thicknesses
Asfalto7H08 DCtranslucent6%constant transmission for thicknesses of 3–10 mm
Terra8C01 DCtransparent16%constant transmission for all thicknesses
Graphit9H02 DCtranslucent1%constant transmission for thicknesses of 3–10 mm
ColourColour NumberTransmission TypeTransmission %
one satin surface
Crystal0M033 SCtransparent92%
SnowWM513 SCtranslucent70%
Black Panther9M805 SCopaque0%
two satin surfaces
Crystal0F00 DCtransparent92%
SnowWM513 DCtranslucent70%
ColourColour NumberTransmission TypeTransmission %Transmission
Clear0D010 DFtranslucent83%transmission as a function of thickness

Buy PLEXIGLAS® / Acrylic Sheets Online

You can purchase PLEXIGLAS® / Acrylic Sheets from our online store. We provide a Free cut to size service and fast nationwide delivery.